Order Genuine Schulte Parts From Your Local Schulte Dealer



Rotary Cutter Blades
Schulte Industries Ltd. recognizes that the mowing blades are a significant component of a rotary cutter and must be used properly as described in the operator’s manual. The blades are intended to cut grass, weeds and brush in a controlled manner. If the blades come in contact with solid objects such as rocks, ground, road surfaces, concrete abutments, steel posts, etc., they can become damaged, bent or even broken.

We at Schulte believe we provide the highest quality blades in the industry. Our rotary cutter blades are manufactured to exacting standards and specifications that require strict chemical, strength and performance characteristics. In addition to the industry standards, these characteristics include charpy V-notch, decarburization, microstructure, chemical analysis, shot peening and fatigue testing.

Chamfered blade bolt holes help alleviate any weak points in the blade bolt area. A stress riser is created when the blade bolt hole is punched out. The abrupt 90 degree change in direction is highly susceptible to increased stresses that may cause cracks or failures in the blade. Schulte wants to provide optimum blade design and construction so you can enjoy longer blade life.

Download Our OEM Blades Info

Download Our OEM Clutch Info




PHONE: (306) 287-3715
OR: 1-800-404-6044

FAX: (306) 287-4066
OR: 1-877-287-5250



Quality - Service - Value - Trust

About Us
Schulte Industries' origins started on April 17th, 1912, when Caspar Schulte acquired the (smithy) blacksmith business in Englefeld, Saskatchewan. Caspar's oldest son John Schulte joined the business with his father in 1932, and like his father, was kept busy keeping customers happy. In 1938 John Schulte took over the blacksmith business on his own.

Read More














California Supply Chains Act

Contact Info

PHONE: (306) 287-3715
OR: 1-800-404-6044
FAX: (306) 287-3355



XH-1500 and FX-520 Rotary Cutters

After our company switched to Schulte, our revenue per cutter went up 33%. We were getting paid by the acre so we were always worried about production and cost per acre. We were having problems with competitive cutters. We tried the Schulte cutters and it didn’t take us long to figure out that it was the cutter we wanted. We didn’t realize how bad our previous cutters were until we put a Schulte on the ground. We think the Schulte cuts better period. It’s unbelievable the quality of cut that we can get at what we would call a high rate of mowing speed. We get paid by the acre so productivity is a big deal for us, ground speed is a big deal for us.

Roman Albert Owner of Lot Maintenance of Oklahoma Inc., Tulsa OK

View All

Safety is Always Front-of-Mind.

Copyright © 2015 Schulte Industries Ltd. All Right Reserved.

Webdesign & Development by 2 Web Design