Products → Forestry Mulchers → Brush Dog Arkansas


Brush Dog Arkansas

The TPVD-ARKANSAS is a stone crusher / forestry mulcher suitable for tractors between 110 to 180 HP and is able to crush stones up to 8” (20cm) as well as tree trunks of 10” (25cm) diameter. 1000PTO drive, 1 3/8” (3.5cm) 21 spline shaft. The Brush Dog can reach a working depth of 5” (13cm) which makes the machine perfect for soil preparation. After working with this machine the soil is ready for planting without any further process . All internal parts subject to wear are easily and fully replaceable.

Applications include forestry land clearing and maintenance of green areas, stone crushing and stabilizing ground, management and maintenance of roads, clearing of roadsides, forest clearing to prevent the spread of fires in high-density forest areas, open passages or corridors through vegetation for pipelines or powerlines and grinding of wood debris.

This machine features a robust chassis in high strength steel able to withstand hard work. A heavy built 23” (585mm) rotor is equipped with Fixed Widia Hammers for long-lasting durability. The tungsten tipped hammers (teeth) have a working life of 700-800 hours when used under normal conditions. A hydraulic rear door and hydraulic hoses are integrated within the chassis.

Other features include:
- Adjustable and interchangeable double counter blades
- Adjustable push bar
- Freewheel (over running clutch).
- Detachable abrasion resistant cover plates for easy changeover
- Chain guard protection in front and back
- PTO shaft protective shielding
- Adjustable depth skid shoes made from abrasion resistant steel
- Hydraulically operated rear door to control feed into mulcher and provide operator protection.

  • Working Width

    98.5” (250cm)

  • Width

    114” (290cm)

  • Length

    55” (140cm)

  • Height (without push bar)

    49” (125cm)

  • Height (with push bar)

    63” (160cm)

  • Depth

    4.75”-5” (12cm-13cm)

  • Diameter of the rotor with hammers

    23.25” (59cm)

  • Weight of hammers

    5lbs (2.38kg)

  • Trunk diameter mulching capacity

    8”-10” (20cm-25cm)

  • Number of belts

    12

  • Tractor Power Required

    120-260hp (89kW-194kW)

HOME

Quality - Service - Value - Trust
 

About Us
Schulte Industries' origins started on April 17th, 1912, when Caspar Schulte acquired the (smithy) blacksmith business in Englefeld, Saskatchewan. Caspar's oldest son John Schulte joined the business with his father in 1932, and like his father, was kept busy keeping customers happy. In 1938 John Schulte took over the blacksmith business on his own.

Read More

 

 

California Supply Chains Act

Contact Info

BY PHONE:
PHONE: (306) 287-3715
OR: 1-800-404-6044
FAX: (306) 287-3355

BY E-MAIL:
E-MAIL: info@schulte.ca

Testimonials

Kelly Hall C & H Mowing

XH-1500 Rotary Cutters

“We’ve found a mower that will stand the test of time, without a doubt the best mower we’ve ever had. We’ve been in business since 1983, we bought four Schulte mowers in ‘94 and a couple more in ‘97 and before we knew it they were all green, we didn’t have any more red ones or yellow ones. The biggest thing we’ve found with Schulte over the competition we used prior to ‘94 is we didn’t have to get the service truck out to the mow route every day when they’d be down for an hour or two once a week on average, if not more. When you’re out on the highway getting paid by the job not the hour, you’re not making money when they’re sitting still. The series three has been almost bullet proof, that’s on highway mowing you know, running 100 pound semi recaps and drive line knuckles through them. I’ve hit three bowling balls in my career, we test them out. I like to give credit where credit is due, you guys have a good product.”

Kelly Hall C & H Mowing, Hebron, IN

View All

Safety is Always Front-of-Mind.


Copyright © 2017 Schulte Industries Ltd. All Right Reserved.

Webdesign & Development by 2 Web Design