Products → Forestry Mulchers → BrushStar Arkansas


BrushStar Arkansas

The TPVD-ARKANSAS is a stone crusher / forestry mulcher suitable for tractors between 110 to 180 HP and is able to crush stones up to 8” (20cm) as well as tree trunks of 10” (25cm) diameter. 1000PTO drive, 1 3/8” (3.5cm) 21 spline shaft. The BrushStar can reach a working depth of 5” (13cm) which makes the machine perfect for soil preparation. After working with this machine the soil is ready for planting without any further process . All internal parts subject to wear are easily and fully replaceable.

Applications include forestry land clearing and maintenance of green areas, stone crushing and stabilizing ground, management and maintenance of roads, clearing of roadsides, forest clearing to prevent the spread of fires in high-density forest areas, open passages or corridors through vegetation for pipelines or powerlines and grinding of wood debris.

This machine features a robust chassis in high strength steel able to withstand hard work. A heavy built 23” (585mm) rotor is equipped with Fixed Widia Hammers for long-lasting durability. The tungsten tipped hammers (teeth) have a working life of 700-800 hours when used under normal conditions. A hydraulic rear door and hydraulic hoses are integrated within the chassis.

Other features include:
- Adjustable and interchangeable double counter blades
- Adjustable push bar
- Freewheel (over running clutch).
- Detachable abrasion resistant cover plates for easy changeover
- Chain guard protection in front and back
- PTO shaft protective shielding
- Adjustable depth skid shoes made from abrasion resistant steel
- Hydraulically operated rear door to control feed into mulcher and provide operator protection.

  • Working Width

    98.5” (250cm)

  • Width

    114” (290cm)

  • Length

    55” (140cm)

  • Height (without push bar)

    49” (125cm)

  • Height (with push bar)

    63” (160cm)

  • Depth

    4.75”-5” (12cm-13cm)

  • Diameter of the rotor with hammers

    23.25” (59cm)

  • Weight of hammers

    5lbs (2.38kg)

  • Trunk diameter mulching capacity

    8”-10” (20cm-25cm)

  • Number of belts

    12

  • Tractor Power Required

    120-260hp (89kW-194kW)

  • Weight

    5,292 lbs (2,472kg)

/ckfinder/userfiles/files/Schulte BrushStar 181219 (Web)(1).pdf

HOME

Quality - Service - Value - Trust
 

About Us
Schulte Industries' origins started on April 17th, 1912, when Caspar Schulte acquired the (smithy) blacksmith business in Englefeld, Saskatchewan. Caspar's oldest son John Schulte joined the business with his father in 1932, and like his father, was kept busy keeping customers happy. In 1938 John Schulte took over the blacksmith business on his own.

Read More

 

 

California Supply Chains Act

Contact Info

BY PHONE:
PHONE: (306) 287-3715
OR: 1-800-404-6044
FAX: (306) 287-3355

BY E-MAIL:
E-MAIL: info@schulte.ca

Testimonials

XH1500 Series III

"We are a commercial mowing business. We purchased a Schulte XH1500 Series 3 15ft. batwing mower this year. In 500 hours of use we have replaced the blades and a set of wing skids once. Blades on our other mowers rarely lasted 100 hours. It takes 2 1/2 hours to change a set of blades. Parts are an expense as well as down time. Our business is mowing not fixing. With our Schulte, our main cost is greasing. The Schulte is a level mowing, smooth running machine. Our employees prefer operating the Schulte. We feel it is worth its cost and would recommend Schulte to anyone."

Larry Rindels Commercial Cutter, Tulsa, OK

View All

Safety is Always Front-of-Mind.


Copyright © 2018 Schulte Industries Ltd. All Right Reserved.

Webdesign & Development by 2 Web Design