Products → Forestry Mulchers → BrushStar Wascana


BrushStar Wascana

The TFVJMFHC-Wascana is a forestry mulcher specially designed for skid-steers.
This model is able to mulch bushes, branches, trunks and stumps up to 8” (20cm)diameter.

Applications include forestry land clearing and maintenance of green areas, management and maintenance of roads, clearing of roadsides, forest clearing to prevent the spread of fires in high-density forest areas, opening passages or corridors through vegetation for pipelines or powerlines and grinding of wood debris.

The machine is equipped standard with a heavy built 18” (46cm) rotor made from abrasian resistant steel and equipped with fixed carbide teeth to increase mulching power and durability. The carbide hammers (teeth) have a working life of 700-800 hours when used under normal conditions.

The BrushStar is equipped with a Sunfab Hydraulic Piston motor which includes an anti-cavitation valve. The chassis is comprised of high strength steel. The carbide hammer tooth profile is staggered on the drum which allows for improved mulcher performance and provides a uniform finish to the mulched material.

Other features include:
- Belt-driven using five belts
- Adjustable push bar
- Rear protection chain guard
- Specially designed for skid-steers with an oil flow of 35 Plus gpm. (132 Plus l/min)
- Adjustable depth skid shoes made from abrasion resistant steel
- Universal attachment for skid-steer

  • Working Width

    79” (200cm)

  • Width

    90.5” (230cm)

  • Height (without push bar)

    41” (105cm)

  • Height (with push bar)

    63” (160cm)

  • Depth

    2.75”-3” (7cm-8cm)

  • Diameter of the rotor with hammers

    18” (46cm)

  • Number of hammers

    34

  • Weight of hammers

    2.5lbs (1.1kg)

  • Trunk diameter mulching capacity

    8”-10” (20cm-25cm)

  • Number of belts

    5

  • Oil flow required

    35 Plus GPM

  • Pressure

    200-260 BAR

HOME

Quality - Service - Value - Trust
 

About Us
Schulte Industries' origins started on April 17th, 1912, when Caspar Schulte acquired the (smithy) blacksmith business in Englefeld, Saskatchewan. Caspar's oldest son John Schulte joined the business with his father in 1932, and like his father, was kept busy keeping customers happy. In 1938 John Schulte took over the blacksmith business on his own.

Read More

 

 

California Supply Chains Act

Contact Info

BY PHONE:
PHONE: (306) 287-3715
OR: 1-800-404-6044
FAX: (306) 287-3355

BY E-MAIL:
E-MAIL: info@schulte.ca

Testimonials

XH-1500 and FX-520 Rotary Cutters

After our company switched to Schulte, our revenue per cutter went up 33%. We were getting paid by the acre so we were always worried about production and cost per acre. We were having problems with competitive cutters. We tried the Schulte cutters and it didn’t take us long to figure out that it was the cutter we wanted. We didn’t realize how bad our previous cutters were until we put a Schulte on the ground. We think the Schulte cuts better period. It’s unbelievable the quality of cut that we can get at what we would call a high rate of mowing speed. We get paid by the acre so productivity is a big deal for us, ground speed is a big deal for us.

Roman Albert Owner of Lot Maintenance of Oklahoma Inc., Tulsa OK

View All

Safety is Always Front-of-Mind.


Copyright © 2018 Schulte Industries Ltd. All Right Reserved.

Webdesign & Development by 2 Web Design