Products → Rock Removal → Giant 2500 Rock Picker


Giant 2500 Rock Picker

  • Large 2.5 cubic yard (1.9 M³ ) hopper.
  • Durable tapered T-iron grate with 1-1/2” (38mm) thick teeth eliminates jamming while allowing soil to sift through for clean rock picking.
  • Batt tubing has 3/8” thick walls.
  • Wrap around, hard surfaced batt teeth offer strength and wear resistance.
  • Large heavy wire springs hold batts firmly in position and cushion shock loads. Spring coil diameter is reduced at the ends to minimize the possibility of breaking the spring hooks.
  • Floating grate protects the machine from damage due to large immovable rocks.
  • Pivoting hitch pole allows the machine to be quickly moved from the offset picking position to a centered transport position.
  • Large 16.5L X 16.1 tires provide superior flotation
  • Weight (approximate)

    4970 lbs (2254 Kg)

  • Overall Length

    205” (5207 mm)

  • Overall width with tires

    114” (2896 mm)

  • Overall width less tires

    91” (2311 mm)

  • Hopper capacity

    2.5 cubic yards (1.9 M³)

  • Picking width

    60” (1524 mm)

  • Dumping height

    49” (1245 mm)

  • Tire size

    16.5L X 16.1

  • Minimum tractor size

    75 HP (56Kw)

  • Normal maximum ground speed

    4 MPH (6.4 KPH)

  • Tractor hydraulic requirement

    12 GPM @1800 PSI, dual remote outlets

  • Hydraulic motor displacement

    14.9 cubic inch/revolution

  • Final drive ratio

    4:1

  • Drive sprockets

    11T and 45T #80

  • Cross over relief valve

    1750 PSI cracking pressure

  • Flow control

    0-15 GPM

  • Recommended reel speed

    36-37 RPM

  • Pick rocks

    2” to 27”

2500 Giant Rock Picker & SRW 1400 Windrower

Schulte Rock Removal Equipment and Rock pickers

Schulte 2500 Giant


HOME

Quality - Service - Value - Trust
 

About Us
Schulte Industries' origins started on April 17th, 1912, when Caspar Schulte acquired the (smithy) blacksmith business in Englefeld, Saskatchewan. Caspar's oldest son John Schulte joined the business with his father in 1932, and like his father, was kept busy keeping customers happy. In 1938 John Schulte took over the blacksmith business on his own.

Read More

 

 

California Supply Chains Act

Contact Info

BY PHONE:
PHONE: (306) 287-3715
OR: 1-800-404-6044
FAX: (306) 287-3355

BY E-MAIL:
E-MAIL: info@schulte.ca

Testimonials

XH1500 Series III

"We are a commercial mowing business. We purchased a Schulte XH1500 Series 3 15ft. batwing mower this year. In 500 hours of use we have replaced the blades and a set of wing skids once. Blades on our other mowers rarely lasted 100 hours. It takes 2 1/2 hours to change a set of blades. Parts are an expense as well as down time. Our business is mowing not fixing. With our Schulte, our main cost is greasing. The Schulte is a level mowing, smooth running machine. Our employees prefer operating the Schulte. We feel it is worth its cost and would recommend Schulte to anyone."

Larry Rindels Commercial Cutter, Tulsa, OK

View All

Safety is Always Front-of-Mind.


Copyright © 2017 Schulte Industries Ltd. All Right Reserved.

Webdesign & Development by 2 Web Design