Products → Rock Removal → Titan 5000 Rock Picker


Titan 5000 Rock Picker

  • Spend more time picking and less time dumping.
  • Super wide 7' grate with wide or narrow spacing options.
  • Huge 5 cu. yd. bucket (actual stone picking capacity).
  • Big 22.5L x 16.1 14 ply tires for flotation to handle the loaded weight.
  • 6.5 foot tall dump height for larger piles and truck loading.
  • 450 BHN Steel teeth and T-iron tops for extra-long life.
  • Greater range of grate movement (lower picking, and higher lift).
  • Heavy Duty Magnaloy Hytrel coupling for Direct Drive Motor.
  • Weight (Approximate)

    8930 lbs. (4060 kg)

  • Overall length

    255” (6477 mm)

  • Width with tires

    159” (4038 mm)

  • Width less tires

    127” (3226 mm)

  • Dumping height

    79” (2007 mm)

  • Grate Width

    84” (2134 mm)

  • Hopper capacity

    5 cu. yds. (3.82 m 3)

  • Tire size

    22.5L x 6.1 x 14ply

  • Required horsepower

    125 HP (93 kW)

  • Required hydraulic pressure

    12 GPM

  • Hydraulic motor displacement

    62.7 cu. inch/rev (1027 ml)

  • Cushion Valve Cracking Pressure

    12 GPM@2200PSI, 4 remote outlets

  • Recommended Reel Speed

    36 rpm

  • Picks rocks

    2” - 27” (5cm - 69cm)

5000 Titan Rock Picker


HOME

Quality - Service - Value - Trust
 

About Us
Schulte Industries' origins started on April 17th, 1912, when Caspar Schulte acquired the (smithy) blacksmith business in Englefeld, Saskatchewan. Caspar's oldest son John Schulte joined the business with his father in 1932, and like his father, was kept busy keeping customers happy. In 1938 John Schulte took over the blacksmith business on his own.

Read More

 

 

California Supply Chains Act

Contact Info

BY PHONE:
PHONE: (306) 287-3715
OR: 1-800-404-6044
FAX: (306) 287-3355

BY E-MAIL:
E-MAIL: info@schulte.ca

Testimonials

XH1500 Series III

"We are a commercial mowing business. We purchased a Schulte XH1500 Series 3 15ft. batwing mower this year. In 500 hours of use we have replaced the blades and a set of wing skids once. Blades on our other mowers rarely lasted 100 hours. It takes 2 1/2 hours to change a set of blades. Parts are an expense as well as down time. Our business is mowing not fixing. With our Schulte, our main cost is greasing. The Schulte is a level mowing, smooth running machine. Our employees prefer operating the Schulte. We feel it is worth its cost and would recommend Schulte to anyone."

Larry Rindels Commercial Cutter, Tulsa, OK

View All

Safety is Always Front-of-Mind.


Copyright © 2017 Schulte Industries Ltd. All Right Reserved.

Webdesign & Development by 2 Web Design