Products → Rotary Cutters → 327 Rotary Cutter

327 Rotary Cutter

  • Improved 7 gauge sloped deck design sheds water and debris to increase deck life.
  • Decks are reinforced with internal 7-gauge steel strongbacks that run the full length of the deck tying together the entire structure with the gearbox stand.
  • 326 and 327 decks are 7-gauge thick steel. Strongbacks are 7-gauge steel.
  • Heavy duty 210 hp gearbox rating.
  • Sidebands are strong and deep. Formed of 1/4” thick steel, they are 12 1/2” deep.
  • Blade pans are 7-gauge steel formed in dished shape for extra strength
  • Cutting Width

    84’ (2.13 m)

  • Cutting Capacity

    4” (10.1 cm)

  • Cutting Height

    2’ - 12’ ((5 cm - 30.5 cm)

  • Approximate Weight

    1950 lbs Lift (884 kg)

  • Dimensions (width x length)

    78” x 1181” (198 cm - 465 cm)

  • Type Hitch

    HD 3 Point Category II & III standard & Quick Hitch

  • Deck Thickness

    7 gauge

  • Sidebands

    .25” x 12.5” (.63 cm x 30.5 cm)

  • Driveshaft

    ASAE Cat 5

  • Gearbox

    210 HP (157 kw)

  • Tractor PTO Speed

    540 RPM

  • Driveline Protection

    Slip Clutch Standard

  • Blade Holder(s)


  • Blades

    .5” x 4” (1.27 cm x 10.2 cm)

  • Blade Tip Speed

    11,875 FPM

  • Tires


  • Minimum Tractor HP

    60 PTO

  • Front and Rear Deflectors

    Chain shielding is standard, double row front and rear


Quality - Service - Value - Trust

About Us
Schulte Industries' origins started on April 17th, 1912, when Caspar Schulte acquired the (smithy) blacksmith business in Englefeld, Saskatchewan. Caspar's oldest son John Schulte joined the business with his father in 1932, and like his father, was kept busy keeping customers happy. In 1938 John Schulte took over the blacksmith business on his own.

Read More



California Supply Chains Act

Contact Info

PHONE: (306) 287-3715
OR: 1-800-404-6044
FAX: (306) 287-3355



XH-1500 and FX-520 Rotary Cutters

After our company switched to Schulte, our revenue per cutter went up 33%. We were getting paid by the acre so we were always worried about production and cost per acre. We were having problems with competitive cutters. We tried the Schulte cutters and it didn’t take us long to figure out that it was the cutter we wanted. We didn’t realize how bad our previous cutters were until we put a Schulte on the ground. We think the Schulte cuts better period. It’s unbelievable the quality of cut that we can get at what we would call a high rate of mowing speed. We get paid by the acre so productivity is a big deal for us, ground speed is a big deal for us.

Roman Albert Owner of Lot Maintenance of Oklahoma Inc., Tulsa OK

View All

Safety is Always Front-of-Mind.

Copyright © 2017 Schulte Industries Ltd. All Right Reserved.

Webdesign & Development by 2 Web Design