Products → Rotary Cutters → 5026 Rotary Cutter


5026 Rotary Cutter

  • 1000 RPM drive line with heavy duty slip clutches and 80 constant velocity u-joint.
  • Round skid pans on standard unit.
  • 2-piece replaceable skid shoes on wings.
  • 10 GA deck with deck protection rings.
  • 7.00 x 15 light truck tires in quantities of 6 or 8.
  • Hydraulic phasing cylinders for level lift.
  • Double acting wing lift cylinders with mechanical float.
  • Spring steel bushings at all major pivot points.
  • Suspension for centre and wing frames.
  • Transport locks for centre section and wings.
  • An optional fixed shredding blade kit is available for enhanced shredding.
  • 50 degree splitter box keeps drive lines short and machine more compact.
  • Cutting width

    314” (7.98 m)

  • Overall width

    321” maximum (8.15 m)

  • Overall length

    205” maximum (5.13 m)

  • Cutting height

    1” - 14” (25 - 356 mm)

  • Transport clearance

    13” (330 mm)

  • Overall Transport Width

    117” (2.98 m)

  • Overall Transport Height

    148” (3.76 m)

  • Shipping Weight, Wet

    6,800 lbs. (3,034 kg)

  • Hitch Weight, Transport

    2,400 lbs. (1,089 kg)

  • Cutting Capacity

    2” diameter material (50 mm)

  • Minimum Tractor HP

    120 HP (90 kW)

  • Tractor Hydraulics

    2 double acting circ, 1,750 psi (12 MPA)

  • Blade RPM and Tip Speeds

  • ......Wing outer

    974 RPM-15,300 ft/min (280km/hr)

  • ......Wing inner

    812 RPM-15,300 ft/min (280km/hr)

  • ......Centre

    800 RPM-15,079 ft/min (276km/hr)

  • Working Range of Wings

    15 down to 45 up

  • Blade Overlap

    6” centre to wing (152 mm) 5”

  • centre to wing (127 mm)

5026 Rotary Cutter, Shredding Cotton Residue

Schulte 5026 in Oat Straw

5026 Cutter Testimonial by Mark Wiederkehr

5026 Edmonton Airport Runway Mowing



HOME

Quality - Service - Value - Trust
 

About Us
Schulte Industries' origins started on April 17th, 1912, when Caspar Schulte acquired the (smithy) blacksmith business in Englefeld, Saskatchewan. Caspar's oldest son John Schulte joined the business with his father in 1932, and like his father, was kept busy keeping customers happy. In 1938 John Schulte took over the blacksmith business on his own.

Read More

 

 

California Supply Chains Act

Contact Info

BY PHONE:
PHONE: (306) 287-3715
OR: 1-800-404-6044
FAX: (306) 287-3355

BY E-MAIL:
E-MAIL: info@schulte.ca

Testimonials

Kelly Hall C & H Mowing

XH-1500 Rotary Cutters

“We’ve found a mower that will stand the test of time, without a doubt the best mower we’ve ever had. We’ve been in business since 1983, we bought four Schulte mowers in ‘94 and a couple more in ‘97 and before we knew it they were all green, we didn’t have any more red ones or yellow ones. The biggest thing we’ve found with Schulte over the competition we used prior to ‘94 is we didn’t have to get the service truck out to the mow route every day when they’d be down for an hour or two once a week on average, if not more. When you’re out on the highway getting paid by the job not the hour, you’re not making money when they’re sitting still. The series three has been almost bullet proof, that’s on highway mowing you know, running 100 pound semi recaps and drive line knuckles through them. I’ve hit three bowling balls in my career, we test them out. I like to give credit where credit is due, you guys have a good product.”

Kelly Hall C & H Mowing, Hebron, IN

View All

Safety is Always Front-of-Mind.


Copyright © 2017 Schulte Industries Ltd. All Right Reserved.

Webdesign & Development by 2 Web Design