Products → Rotary Cutters → FX-107 Rotary Cutter


FX-107 Rotary Cutter

  • Rigid single domed 7 gauge deck construction   
  • 1/4” x 4” deck protection ring to guard against blade to deck damage
  • Base unit common to all configurations
  • Pull type and 3 point hitching options
  • Larger pan with shorter blades provides more durability
  • 540 RPM drive
  • Heavy duty gear box and drive line, the same units as on our large cutters
  • Pull type unit has the ability to accept open clevis, solid tongue, adjustable clevis or precision hitch options
  • Tire options on pull type: solid laminate, severe duty, severe duty foam filled or forklift tires
  • Tire options on 3 pt: Solid Laminate Castor tires
  • Double safety chains standard front and rear on all units
  • Cutting Width

    84" (2.13 m)

  • Overall Width

    95.5" ( 2.43 m)

  • Overall Length

    173.5" (4.41 m) Trailing Unit

  • Transport Clearance

    10.5" (26.7 cm)

  • Cutting Height

    3" - 12 7/8" (7.6 cm - 33 cm)

  • Cutting Capacity

    3" (7.6 cm)

  • Approximate Weight

    Trailing -2010 lbs (912 kg), 3 Point -1980 lbs (898 kg)

  • Hitch Type

    Cat. II & III 3 Point / Trailing Pull

  • Deck Thickness

    7 GA (3/16", 4.6 mm)

  • Side Skirt

    1/4" x 13.69" ( 6.35 mm x 347 mm)

  • Gear Box Rating

    Center 210 hp (157kw)

  • Blade Tip Speed

    540 RPM - 17086 FPM

  • Tractor PTO Speed

    540

  • Minimum Tractor HP

    50 HP ( 37.3 kW)

  • Deflectors

    Double Chain Front and Rear

HOME

Quality - Service - Value - Trust
 

About Us
Schulte Industries' origins started on April 17th, 1912, when Caspar Schulte acquired the (smithy) blacksmith business in Englefeld, Saskatchewan. Caspar's oldest son John Schulte joined the business with his father in 1932, and like his father, was kept busy keeping customers happy. In 1938 John Schulte took over the blacksmith business on his own.

Read More

 

 

California Supply Chains Act

Contact Info

BY PHONE:
PHONE: (306) 287-3715
OR: 1-800-404-6044
FAX: (306) 287-3355

BY E-MAIL:
E-MAIL: info@schulte.ca

Testimonials

FX 1800

"The Schulte FX-180 performs great in all conditions. It has replaced some of my older mowers and handles all mowing conditions I can throw at it. It runs smooth with its 7ga spun formed stump jumpers and the 7ga domed deck sheds water and is easy to keep clean. This single domed deck ads extra room under the deck area for a noticeably improved and increased cut rate over my old mowers. I would recommend this Schulte mower to anyone looking at an extremely tough, fast/clean cutting and smooth running Flex Wing Mower. Schulte is a cut above the rest!"

Jim Shipley Farmer, Lake Worth, FL

View All

Safety is Always Front-of-Mind.


Copyright © 2017 Schulte Industries Ltd. All Right Reserved.

Webdesign & Development by 2 Web Design