Products → Rotary Cutters → FX-1200 Rotary Cutter


FX-1200 Rotary Cutter

  • A single domed 7 ga continuously welded deck makes the cutter extremely easy to clean,prevents water pooling and rusting and helps shed debris.
  • 6.5 ” blade overlap and high blade tip speeds.
  • A four gearbox drive line with independent slip clutches.The FX-1800 utilizes heavy-duty and extremely reliable Bondioli gearboxes.The splitter has 1 3/4 ” 20 spline input and output shafts and is rated at 260hp. The centre and wing boxes have 1 3/4 ” 20 spine input shafts,2 3/8 ” down shafts and are rated at 210hp.
  • An 80 degree CV shaft allows for smooth power transmission during tight turns.The CV for 540 rpm is a Category 6 and for 1000 rpm is a category 5 The driveline on the cutter itself employs self adjusting friction clutches to protect your investment and always operate at peak performance.All clutches are located under the main shield for ease of service.
  • Spun formed 7gauge stump jumpers (round skid pans) ensure durability and balance.
  • Available in 540 or 1000rpm drive.
  • Cutting Width

    126” (3.20m)

  • Overall Width

    137” (3.48m)

  • Overall Length

    202” (5.13m)

  • Transport Width

    93” (2.36m) (Singles on wings) 97.5" (2.47m) (Duals on wings)

  • Transport Height

    84"(2.13m)

  • Deck Thickness

    7GA (3/16",4.6mm)

  • Weight

    4313 lbs (1956kg) to 4863lbs (2205kg)

  • Hitch Weight

    1602 lbs (727kg) (Depends on configuration)

  • Minimum Tractor Hp

    45 HP (34kW)

  • Recommended Tractor HP

    80 HP (60kW)

  • Tractor PTO Speed

    540 or 1000rpm

  • Cutting Height

    1.75"to 16.75" (44.5mm to 425mm)

  • Ground Clearance

    14.75"(42.5mm)

  • Cutting Capacity

    4"(101.6mm)

  • Blade Overlap

    6.5"(165.1mm)

  • Divider Gearbox Rating

    260 HP (194kw)

  • Center & Wing Gearbox Rating

    210 HP (142kw)

  • Output Shaft

    2.38"(60.3mm)

  • Blade Tip Speed

    540 rpm

  • Center

    15980 ft/min (4871m/min)

  • Wing

    15459 ft/min (4711m/min)

  • Blade Tip Speed

    1000 rpm

  • Center

    15974 ft/min (4869m/min)

  • Wing

    15708 ft/min (4788m/min)

  • Wing Working Range

    25 o down to 87 o up

  • Wing Floating Range

    25 o down to 87 o up

  • Drive Size, Main

    Cat.5CV (1000rpm), Cat.6 CV (540 rpm)

  • Drive Size, Centre and Wings

    Category 5

  • Side Skirt Depth & Thickness

    13.63"(346mm)& 1/4 ” (6.35mm)

HOME

Quality - Service - Value - Trust
 

About Us
Schulte Industries' origins started on April 17th, 1912, when Caspar Schulte acquired the (smithy) blacksmith business in Englefeld, Saskatchewan. Caspar's oldest son John Schulte joined the business with his father in 1932, and like his father, was kept busy keeping customers happy. In 1938 John Schulte took over the blacksmith business on his own.

Read More

 

 

California Supply Chains Act

Contact Info

BY PHONE:
PHONE: (306) 287-3715
OR: 1-800-404-6044
FAX: (306) 287-3355

BY E-MAIL:
E-MAIL: info@schulte.ca

Testimonials

FX 1800

"The Schulte FX-180 performs great in all conditions. It has replaced some of my older mowers and handles all mowing conditions I can throw at it. It runs smooth with its 7ga spun formed stump jumpers and the 7ga domed deck sheds water and is easy to keep clean. This single domed deck ads extra room under the deck area for a noticeably improved and increased cut rate over my old mowers. I would recommend this Schulte mower to anyone looking at an extremely tough, fast/clean cutting and smooth running Flex Wing Mower. Schulte is a cut above the rest!"

Jim Shipley Farmer, Lake Worth, FL

View All

Safety is Always Front-of-Mind.


Copyright © 2017 Schulte Industries Ltd. All Right Reserved.

Webdesign & Development by 2 Web Design