Products → Rotary Cutters Mowers → FX-209 Rotary Cutter


FX-209 Rotary Cutter

  • Push or pull capability 
  • Rigid single domed 7 guage deck construction
  • 1/4” x 4” deck protection ring to guard against blade to deck damage
  • Two rotor base unit common to all configuration
  • Pull type, three point, semi mount and semi mount swing hitching options
  • 540 and 1000 RPM drive options
  • 9ft / 3m overall width
  • Heavy duty gear boxes and G8 drive lines
  • Pull type rotary cutter has the ability to accept open clevis, solid tongue, adjustable clevis or precision hitch options
  • Four tire options: solid laminate, severe duty, severe duty foam filled or forklift tires
  • Overall Width

    116.5" ( 2.96 m) Skids Inboard 120.5" (3.06 m) Skids Outboard

  • Overall Length

    162.5" (4.1 m) Trailing Unit, 127" (3.3 m), 3 Point / Semi Mount Swing / Semi Mount

  • Transport Clearance

    11.5" (29.2 cm)

  • Cutting Height

    2" - 13" (5.1 cm - 33 cm)

  • Cutting Width

    109.25" (2.78 m)

  • Cutting Capacity

    3" (7.6 cm)

  • Approximate Weight

    2400 lbs (1088 kg) Trailing, 2300 lbs (1043 kg) 3 Point, 2100 lbs (952 kg) Semi Mount 2860 lbs (1297 kg) Semi Mount Swing

  • Hitch Type

    Cat. II & III 3 Point / Semi Mount Swing (13” left or right swing), Semi Mount / Trailing Pull

  • Deck Thickness

    7 GA (3/16", 4.6 mm)

  • Side Skirt

    1/4" x 13.75" ( 6.35 mm x 337 mm)

  • Gear Box Rating

    Outboard 210 HP (157 kW)

  • Blade Tip Speed

    540 RPM - 17086 FPM 1000 RPM - 17355 FPM

  • Blade Overlap

    4.75" ( 121 mm)

  • Tractor PTO Speed

    540 or 1000 RPM

  • Minimum Tractor HP

    50 HP ( 37.3 kW)

  • Deflectors

    Double Chain Front and Rear

FX-209 Rotary Mower Rear Mount

FX-209 Rotary Mower Front Mount


HOME

Quality - Service - Value - Trust
 

About Us
Schulte Industries' origins started on April 17th, 1912, when Caspar Schulte acquired the (smithy) blacksmith business in Englefeld, Saskatchewan. Caspar's oldest son John Schulte joined the business with his father in 1932, and like his father, was kept busy keeping customers happy. In 1938 John Schulte took over the blacksmith business on his own.

Schulte Industries manufactures Rock Pickers, Snow Blowers, Tillage Equipment and Rotary Cutters

Read More

 

 

California Supply Chains Act

Contact Info

BY PHONE:
PHONE: (306) 287-3715
OR: 1-800-404-6044
FAX: (306) 287-3355

BY E-MAIL:
E-MAIL: info@schulte.ca

Testimonials

XH1500

"We are a commercial mowing business. We purchased a Schulte XH1500 15ft. batwing mower this year. In 500 hours of use we have replaced the blades and a set of wing skids once. Blades on our other mowers rarely lasted 100 hours. It takes 2 1/2 hours to change a set of blades. Parts are an expense as well as down time. Our business is mowing not fixing. With our Schulte, our main cost is greasing. The Schulte is a level mowing, smooth running machine. Our employees prefer operating the Schulte. We feel it is worth its cost and would recommend Schulte to anyone."

Larry Rindels Commercial Cutter, Tulsa, OK

View All

Safety is Always Front-of-Mind.


Copyright © 2019 Schulte Industries Ltd. All Right Reserved.

Webdesign & Development by 2 Web Design