Products → Rotary Cutters → FX-520 Rotary Cutter


FX-520 Rotary Cutter

  • 5 Rotor design optimizes cutting performance, increases productivity and delivers extremely even distribution over competitors 20’ models.
  • Unique 6 Gear Box layout, 260 hp divider box, 190 hp down boxes, 1000rpm driveline gives unsurpassed cutting performance with higher cut speeds.
  • 5 Slip Clutches, 1 at each down box protects the drive line. Also, shear pin at the input shaft on the divider box.
  • Continuously welded 7 ga modular deck design improves strength and reduces rusting.
  • Hitch Lift Assist helps to lift the mower over obstacles so as to prevent undo stress on blades and down shafts.
  • A hydraulic phasing cylinder system ensures an accurate parallel lift across the cutter.
  • Cutting Width

    240” (6.1 m)

  • Overall Width

    247” (6.2 m)

  • Overall Length

    242” (6.15 m)

  • Cutting Height

    2" - 17.5” (51 - 445 mm) depending on tire size

  • Transport Width

    104" (2.6 m)

  • Transport Height

    120” (3.05 m)

  • Weight

    6525lbs. (2960 kg) (single chain, 6 tires, pans)

  • Hitch Weight

    2280 lbs (1034kg) (single chain, 6 tires, pans)

  • Cutting Capacity

    2” (51 mm)

  • Minimum Tractor Size

    100 HP (75 kW)

  • Blade Tip Speed

    16000 ft/min (4900m/m)

  • Blade Overlap

    6" (153mm)

  • Divider Box rating

    260 hp (194kw)

  • Down Box rating

    190 hp (142kw)

  • Deck Thickness .180

    .180" (7 ga) (4.6mm)

  • Skirt Thickness

    1/4" (6.4mm)

  • Wing Operating Range

    20 degrees down to 90 degrees up

  • Wing Float Range

    20 degrees down to 40 degrees up

*Divider box has 1.75" 20 spline input and output shafts.
*Down boxes have 1.75” 20 spline input shafts and 2.375” down shafts

Schulte FX520


HOME

Quality - Service - Value - Trust
 

About Us
Schulte Industries' origins started on April 17th, 1912, when Caspar Schulte acquired the (smithy) blacksmith business in Englefeld, Saskatchewan. Caspar's oldest son John Schulte joined the business with his father in 1932, and like his father, was kept busy keeping customers happy. In 1938 John Schulte took over the blacksmith business on his own.

Read More

 

 

 

 

 

 

 

 

 

 

 

 

 

California Supply Chains Act

Contact Info

BY PHONE:
PHONE: (306) 287-3715
OR: 1-800-404-6044
FAX: (306) 287-3355

BY E-MAIL:
E-MAIL: info@schulte.ca

Testimonials

XH-1500 and FX-520 Rotary Cutters

After our company switched to Schulte, our revenue per cutter went up 33%. We were getting paid by the acre so we were always worried about production and cost per acre. We were having problems with competitive cutters. We tried the Schulte cutters and it didn’t take us long to figure out that it was the cutter we wanted. We didn’t realize how bad our previous cutters were until we put a Schulte on the ground. We think the Schulte cuts better period. It’s unbelievable the quality of cut that we can get at what we would call a high rate of mowing speed. We get paid by the acre so productivity is a big deal for us, ground speed is a big deal for us.

Roman Albert Owner of Lot Maintenance of Oklahoma Inc., Tulsa OK

View All

Safety is Always Front-of-Mind.


Copyright © 2017 Schulte Industries Ltd. All Right Reserved.

Webdesign & Development by 2 Web Design