Products → Rotary Cutters → FX-530 Rotary Cutter


FX-530 Rotary Cutter

  • 30’ of mowing and shredding excellence
  • Accommodates 30”, 32”, 36”, 38" row spacings
  • Excellent shredding and distribution capabilities on Fixed Knife units
  • Unique drive layout allows for clutch at every down box
  • Spun formed pans available on pan unit
  • Floating hitch with rubber grommet rear suspension
  • Phasing system for a parallel lift cut
  • Non-adjustable clutches provide low maintenance
  • Available Cyclone Deck Debris Fan Kit
  • 350hp, 60 degree splitter gearbox allows for unique driveline layout
  • Cutting Width

    365" (30.4 ft or 9.3 m)

  • Overall Width

    377" (31.4 ft or 9.6 m)

  • Overall Length

    236" (19.7 ft or 6 m)

  • Cutting Height

    2" - 15" (51mm - 381mm)

  • Std Wheel Ext., Transport Width

    118" (3 m)

  • Row Crop Wheel Ext., Transport Width

    153" (3.88 m)

  • Transport Height - without hyd. folding wing tips

    176" (14.7 ft or 4.5 m)

  • Transport Height - with hyd. folding wing tips

    153" (12.75 ft or 3.9 m)

  • Weight

    12,300 lbs (5580 kg) depending upon configuration

  • Hitch Weight

    4,500 lbs (2041 kg) depending upon configuration

  • Cutting Capacity

    2" (51 mm)

  • Minimum Tractor Size

    200 hp (149 kW) ensure drawbar can support weight

  • Blade Tip Speed

    16,300 ft/min (4970 m/min)

  • Blade Overlap

    6" (152 mm)

  • Divider Box Rating

    350 hp (261 kW)

  • Down Box Rating

    210 hp (157 kW)

  • Deck Thickness

    .134" (10 ga) (3.4 mm)

  • Skirt Thickness

    1/4" (6.4 mm)

  • Wing Operating Range

    16 degrees down to 21 degrees up

*Divider box has 1.75" 20 spline input and output shafts.
*Down boxes have 1.75” 20 spline input shafts and 2.375” down shafts

Schulte FX-530

FX-530 10 Row Cotton Shredder

FX-530 Cutting wheat straw in Washington

FX-530 Shredding Rice Straw in California



HOME

Quality - Service - Value - Trust
 

About Us
Schulte Industries' origins started on April 17th, 1912, when Caspar Schulte acquired the (smithy) blacksmith business in Englefeld, Saskatchewan. Caspar's oldest son John Schulte joined the business with his father in 1932, and like his father, was kept busy keeping customers happy. In 1938 John Schulte took over the blacksmith business on his own.

Read More

 

 

California Supply Chains Act

Contact Info

BY PHONE:
PHONE: (306) 287-3715
OR: 1-800-404-6044
FAX: (306) 287-3355

BY E-MAIL:
E-MAIL: info@schulte.ca

Testimonials

Kelly Hall C & H Mowing

XH-1500 Rotary Cutters

“We’ve found a mower that will stand the test of time, without a doubt the best mower we’ve ever had. We’ve been in business since 1983, we bought four Schulte mowers in ‘94 and a couple more in ‘97 and before we knew it they were all green, we didn’t have any more red ones or yellow ones. The biggest thing we’ve found with Schulte over the competition we used prior to ‘94 is we didn’t have to get the service truck out to the mow route every day when they’d be down for an hour or two once a week on average, if not more. When you’re out on the highway getting paid by the job not the hour, you’re not making money when they’re sitting still. The series three has been almost bullet proof, that’s on highway mowing you know, running 100 pound semi recaps and drive line knuckles through them. I’ve hit three bowling balls in my career, we test them out. I like to give credit where credit is due, you guys have a good product.”

Kelly Hall C & H Mowing, Hebron, IN

View All

Safety is Always Front-of-Mind.


Copyright © 2017 Schulte Industries Ltd. All Right Reserved.

Webdesign & Development by 2 Web Design