Products → Rotary Cutters Mowers → GX-150 Rotary Cutter

GX-150 Rotary Cutter

  • A single domed 10ga continuously welded deck makes the cutter extremely easy to clean, prevents water pooling, rusting and helps shed debris
  • An 80° CV shaft allows for smooth power transmission during tight turns. The “Best in Class” drive system features a category 6 CV for 540rpm and the 1000 rpm is a category 5. The drive line on the cutter itself employs self-adjusting friction clutches to protect your investment and always operate at peak performance
  • Equipped with Schulte Super Suction Blades with 6.5 ” blade overlap for maximum grass lift and cut
  • A four-gearbox drive line with independent slip clutches
  • Deck protection rings are standard and protect the cutter deck from rising blades
  • Deep 13 5/8” deck combined with high blade tip speeds, provides a faster cut rate than competitors.
  • High flex wing working range of 25° down to 90° up
  • Solid laminated tires 20” or 26” or forklift tires available
  • 4, 6 or 8 tire options
  • Heavy duty 3/4” thick blade disc with 4” blades and pentagon blade bolts
  • Safety light kit
  • Pro Level hitch
  • Leveling rod (optional addition of second tension link)
  • 540 or 1000 RPM Drive package
  • Single chains front and rear
  • Gearbox sight glass
  • Heavy duty cast hinge line with wiper seals
  • Deck protection rings are standard
  • Cutting Width

    15’ (4.57m)

  • Overall Width

    15.8’ (4.83m)

  • Overall Length

    16.8’ (5.13m)

  • Cutting Height

    1.75”-16.75” (45mm-425mm)

  • Transport Width

    93” (2.36m)

  • Transport Height

    84” (2.13m)

  • Hitch Weight

    1,702lbs (772kg)

  • Cutting Capacity

    3.5” (89mm)

  • Minimum Tractor Size

    50hp (37kw)

  • Blade Tip Speed Center 540rpm

    16,286 ft/min (4964m/min)

  • Blade Tip Speed Wing 540rpm

    15,459 ft/min (4711m/min)

  • Blade Tip Speed Center 1000rpm

    16,390 ft/min (4996m/min)

  • Blade Tip Speed Wing 1000rpm

    15,708 ft/min (4788m/min)

  • Blade Overlap

    6.5” (165mm)

  • Divider Gearbox Rating

    260hp (194kw)

  • Center & Wing Gearbox Rating

    210hp (155kw)*

  • 540 CV

    Cat 6

  • 1000 CV

    Cat 5

  • Wing Drive Shafts

    Cat 5

  • Deck Thickness

    .135” (10ga or 3.4mm)

  • Side Skirt Depth & Thickness

    13.6” (346mm) 1/4” (6.4mm)

  • Wing Working Range

    25° down to 90° up

  • Wing Floating Range

    25° down to 30° up


Quality - Service - Value - Trust

About Us
Schulte Industries' origins started on April 17th, 1912, when Caspar Schulte acquired the (smithy) blacksmith business in Englefeld, Saskatchewan. Caspar's oldest son John Schulte joined the business with his father in 1932, and like his father, was kept busy keeping customers happy. In 1938 John Schulte took over the blacksmith business on his own.

Schulte Industries manufactures Rock Pickers, Snow Blowers, Tillage Equipment and Rotary Cutters

Read More



California Supply Chains Act

Contact Info

PHONE: (306) 287-3715
OR: 1-800-404-6044
FAX: (306) 287-3355



5026 Rotary Cutter

"We are a 5000 acre Texas South Plain cotton farm. We purchased a Schulte 5026 rotary cutter 5 years ago. All of our cotton acres are shredded annually plus we mow a lot of CRP. Shredded or mowed material is evenly distributed. The machine has more than exceeded our expectations. Maintenance on our Schulte is minimal; a set of blades lasts well through a season. The Schulte 5026 is very operator friendly, which makes it easy for any of our operators to run the machine." 

Theadore Wells Cotton Farmer, Stanton, TX

View All

Safety is Always Front-of-Mind.

Copyright © 2020 Schulte Industries Ltd. All Right Reserved.

Webdesign & Development by 2 Web Design