Products → Rotary Cutters Mowers → TPX-318 Rotary Cutter


TPX-318 Rotary Cutter

  • Fixed knives and shrouding for optimum shredding performance and distribution when doing residue management in row crops like corn, cotton and sugar cane
  • Adjustable wheel standards for shredding in virtually all row crop spacings
  • Four position adjustable 3pt to keep cutter as close to the tractor as possible
  • Heavy duty rubber coupler on drive line for protection in harsh conditions
  • Fold up design for narrow transport width
  • Greasable bushings everywhere for longer life
  • Timed blades (without blade to blade contact) allow for a compact front to back length
  • Large flotation skid steer tires (10.5” X 27”) to minimize compaction
  • Easy height adjustment on rear tires
  • Double acting wings that can be locked off in rigid position for row crops or flex wing for ground contouring
  • Only one hydraulic circuit needed to operate this unit
  • Wide hinge gap to keep debris from falling on center deck when folding up wings
  • Splitter box

    210hp (157kw)

  • Down boxes

    210hp (157kw)

  • Tractor RPM

    1000

  • 1000

    Cat 6 with clutch

  • Cutter shafts

    Cat 6 with rubber coupler

  • Center blade tip speed

    16,308 (ft/min)

  • Wing blade tip speed

    16,308 (ft/min)

  • Deck thickness

    10 ga (.34cm)

  • Cut capacity

    3.5” (8.9cm)

  • Cut Width

    18.5’ (5.64m)

  • Blades

    1/2” x 4” (1.3cm X 10.2cm)

  • 3pt hitch

    Cat 2 quick, cat 3, cat 3 quick, cat 4, cat 4 quick

  • Tires

    Skid steer - 10.5 (26.7cm) x 27” (68.6cm)

  • Transport width

    116.5” (296cm) wing tip to wing tip

  • Machine height

    8.75ft (2,67m)

  • Cut height

    2” - 17” (5-43cm)

  • Blade overlap

    3” (7.6cm)

  • Safety deflectors

    Single chains standard, rear and front belting option

  • Approximate weight

    6,300lbs (2858kg)

  • Wing float (when in float position)

    11 degrees down & 18 degrees up (lower cylinder mount), 0 degrees down & 20 degrees up (upper mount)

  • Machine length

    12.7 ft (3.87 m)

  • Min HP

    185 (136kw) (3pt lift capacity dependent)

  • Max HP

    325 (239kw)

  • Front tractor weight kits may be required to ensure a minimum of 20% of total tractor weight is on front tires to maintain steering control and to prevent the front of the tractor from rearing up duri

HOME

Quality - Service - Value - Trust
 

About Us
Schulte Industries' origins started on April 17th, 1912, when Caspar Schulte acquired the (smithy) blacksmith business in Englefeld, Saskatchewan. Caspar's oldest son John Schulte joined the business with his father in 1932, and like his father, was kept busy keeping customers happy. In 1938 John Schulte took over the blacksmith business on his own.

Schulte Industries manufactures Rock Pickers, Snow Blowers, Tillage Equipment and Rotary Cutters

Read More

 

 

California Supply Chains Act

Contact Info

BY PHONE:
PHONE: (306) 287-3715
OR: 1-800-404-6044
FAX: (306) 287-3355

BY E-MAIL:
E-MAIL: info@schulte.ca

Testimonials

5026 Rotary Cutter

"We are a 5000 acre Texas South Plain cotton farm. We purchased a Schulte 5026 rotary cutter 5 years ago. All of our cotton acres are shredded annually plus we mow a lot of CRP. Shredded or mowed material is evenly distributed. The machine has more than exceeded our expectations. Maintenance on our Schulte is minimal; a set of blades lasts well through a season. The Schulte 5026 is very operator friendly, which makes it easy for any of our operators to run the machine." 

Theadore Wells Cotton Farmer, Stanton, TX

View All

Safety is Always Front-of-Mind.


Copyright © 2020 Schulte Industries Ltd. All Right Reserved.

Webdesign & Development by 2 Web Design