Products → Rotary Cutters Mowers → XH-1000 Series 4 Industrial Grade Cutter
XH-1000 Series 4 Industrial Grade Cutter
- New, extra heavy duty, high horsepower Bondioli gearboxes with new oil level sight glass and 1-3/4" input shafts and 3” (75mm) output shaft
- New extra heavy duty Bondioli G8 drive lines
- New high-torque wing clutches with high slip release settings ensure better performance in rough cutting
- Single domed, sweep clean deck design eliminates excess weight over competitive double deck designs, eliminates build up of debris and prevents rusting on top side of deck
- Tandem walking axles result in smooth operation over rough surfaces
- Increased frame depth & blade tip speed results in a superior flow of material
- With larger 24" aircraft tires, transport height is increased to 17.5" along with improved performance in wet conditions
- Lower pressure 8" stroke hydraulic phasing cylinders for a level lift
- Low maintenance Constant Velocity Tractor Shaft or Patent Pending 540rpm Equal Angle Hitch available
- Center suspension reduces stress on tractor drawbar
3/8” thick formed deck protection rings prevent blade to deck contact
- Double safety chains with individually replaceable links are standard equipment
- Large high horsepower gearboxes with 1-3/4" input shafts and 2-3/8" output shafts, 260hp divider, 210hp center & wings
- Higher slip clutch release settings than previous design ensures better performance in rough cutting
- 1/4” thick stump jumpers with patent pending Pentagon Blade Bolt design allows cutter sections to ride over obstructions
-
Cutting width - 126" (3.20 m)
-
Overall width - 139" (3.53 m)
-
Overall length - 192" (4.88 m)
-
Transport width, min - 88" (2.24 m)
-
Transport Height - 88" (2.24 m)
-
Deck Thickness - 7GA (3/16") (4.6 mm)
-
Weight, approx. - 5200 lbs (2364 kg)
-
Hitch weight, approx. - 1700 lbs (773 kg)
-
Minimum tractor HP - 50 HP (45 kW)
-
Recommended tractor HP - 75 HP (60 kW)
-
Cutting height - 1.5 to 17.5" (38 to 144 mm)
-
Ground Clearance - 17.5" (444mm)(with 24” tire)
-
Cutting capacity - 4" material (102 mm)
-
Blade overlap - 6.5" (165mm)
-
Divider gearbox rating - 260 HP (194kW)
-
Centre/wing gearbox rating - 210 HP (157 kW)
-
Blade tip speed, - 540 rpm
-
Centre - 848 rpm, 15,493 ft/min (4874m/min)
-
Wing -986 rpm, 15,991 ft/min (4722m/min)
-
Blade tip speed, - 1000 rpm
-
Centre - 850 rpm, 15,743 ft/min (4884m/min)
-
Wing - 1002 rpm, 16,022 ft/min (4798m/min)
-
Wing working range - 25 degree down to 90 degree up