Products → Rotary Cutters Mowers → XH-1500 Industrial Grade Rotary Cutter

XH-1500 Industrial Grade Rotary Cutter

  • Extra heavy duty rotary cutter, high horsepower Bondioli gearboxes with new oil level sight glass and 1-3/4" input shafts and 3” (75mm) output shaft
  • New extra heavy duty Bondioli G8 drive lines
  •  New high-torque wing clutches ensure better performance in rough cutting
  • Fitted with replaceable spring steel bushings at all major pivot locations to increase the ease of maintenance and life of the rotary cutter.  New locations include the pivot points on the hitch, tension links, center suspension, wing suspension and all wheel standards. 

  • Single domed, sweep clean deck design eliminates excess weight over competitive double-deck designs, eliminates build up of debris and prevents rusting on top side of deck
  • Tandem walking axles result in smooth operation over rough surfaces
  • A deep cutting chamber coupled with high blade tip speeds result in a superior cut & unsurpassed material flow
  • 24" severe duty tires, transport height is increased to 17.5" along with improved performance in wet conditions
  • Lower pressure 8" stroke hydraulic phasing cylinders for a level lift
  • Low maintenance CV Tractor Shaft or 540rpm Equal Angle Hitch available
  • Serviceable, bolt on hitch swivel
  • Center suspension reduces stress on tractor drawbar
  • 3/8” thick formed deck protection rings prevent blade to deck contact
  • Double safety chains with individually replaceable links are standard equipment
  • Cutting width

    XH1500 -XH1000 180" (4.57m)......................126" (3.20m)

  • Overall width

    190" (4.83m)......................139" (3.53m)

  • Overall length

    192" (4.88m)......................192" (4.88m)

  • Transport width

    min 88" (2.24m)..................88" (2.24m)

  • Transport height

    88" (2.24m)........................88" (2.24m)

  • Deck thickness

    7GA (3/16") (4.6mm)...........7GA (3/16") (4.6mm)

  • Weight, approx.

    5800 lbs (2636kg)...............5200 lbs (2364kg)

  • Hitch weight, approx.

    1900 lbs (864kg).................1700 lbs (773kg)

  • Minimum tractor HP

    65 HP (52kW).....................50 HP (45kW)

  • Recommended tractor HP

    85 HP (67kW).....................75 HP (60kW)

  • Cutting height

    1.5 to 17.5" (38 to 456mm)

  • Ground clearance

    17.5" (444mm) (with 24” tire)

  • Cutting capacity

    4" material (102mm)

  • Blade overlap

    6.5" (165mm)

  • Divider gearbox rating

    260 HP (194kW)

  • Centre/wing gearbox rating

    225 HP (168kw)*

  • Blade tip speed

    540 rpm

  • Centre

    850 rpm, 15,743 ft/min (4884m/min)

  • Wing

    1002 rpm, 16,022 ft/min (4798m/min)

  • Wing working range

    25 degrees down to 90 degrees up

  • * Based on intermittent use.

  • Drive Size Center and Wings

    Category 6


Quality - Service - Value - Trust

About Us
Schulte Industries' origins started on April 17th, 1912, when Caspar Schulte acquired the (smithy) blacksmith business in Englefeld, Saskatchewan. Caspar's oldest son John Schulte joined the business with his father in 1932, and like his father, was kept busy keeping customers happy. In 1938 John Schulte took over the blacksmith business on his own.

Schulte Industries manufactures Rock Pickers, Snow Blowers, Tillage Equipment and Rotary Cutters

Read More



California Supply Chains Act

Contact Info

PHONE: (306) 287-3715
OR: 1-800-404-6044
FAX: (306) 287-3355



XH-1500 and FX-520 Rotary Cutters

After our company switched to Schulte, our revenue per cutter went up 33%. We were getting paid by the acre so we were always worried about production and cost per acre. We were having problems with competitive cutters. We tried the Schulte cutters and it didn’t take us long to figure out that it was the cutter we wanted. We didn’t realize how bad our previous cutters were until we put a Schulte on the ground. We think the Schulte cuts better period. It’s unbelievable the quality of cut that we can get at what we would call a high rate of mowing speed. We get paid by the acre so productivity is a big deal for us, ground speed is a big deal for us.

Roman Albert Owner of Lot Maintenance of Oklahoma Inc., Tulsa OK

View All

Safety is Always Front-of-Mind.

Copyright © 2020 Schulte Industries Ltd. All Right Reserved.

Webdesign & Development by 2 Web Design