Products → Snow Removal → FM-115


FM-115

  • The FM-115 is a perfect match for Schulte model SDX or RDX snow blowers and without the drivetrain for the SV-10, SV-12 and SV-14 Folding V Plows.
  • No matter how much snow you need to move you will appreciate the FM-115. The Front Mount Frames give you the ability to mount your 3pt snow blower or SV Plow on the front of your tractor instead of on the tractor's rear 3pt hitch. 
  • The FM-350 and FM-115 offer you better visibility and ergonomics when coupled with a Schulte Snow Blower. Blowing snow while driving forward, is more efficient than blowing snow in reverse.
  • The FM-115 allow you an increased selection of travel speeds, as your tractor has many more forward gears then reverse gears. This increased gearing selection will result in better snow blowing performance and less wear and tear on the tractor clutch, and your neck.
  • Tractor horsepower, minimum

    55 HP (41 kw) for SDX-840, 85 HP (63kw) for SDX-102, RDX-102

  • Tractor horsepower, maximum

    115 HP (86 kw)

  • Tractor Hydraulic Requirement

    3 remote circuits with a minimum total hydraulic output of 10 GPM at 1200 PSI.

  • Tractor PTO

    540 RPM

  • Lift capacity

    5000 lbs (2268 kg)

  • Adjustability

    Fits tractors between 111.5” (2.8m) & 164.5” (4.2m) from front mount plate to drawbar pin

  • Nominal ground clearance

    10”(25 cm) depending on tractor installation 3”(7.6 cm) higher without drive train depending on tractor installation

  • Nominal lift range

    18” (45.7cm)

  • Weight

    1400 lbs (636kg)

HOME

Quality - Service - Value - Trust
 

About Us
Schulte Industries' origins started on April 17th, 1912, when Caspar Schulte acquired the (smithy) blacksmith business in Englefeld, Saskatchewan. Caspar's oldest son John Schulte joined the business with his father in 1932, and like his father, was kept busy keeping customers happy. In 1938 John Schulte took over the blacksmith business on his own.

Read More

 

 

California Supply Chains Act

Contact Info

BY PHONE:
PHONE: (306) 287-3715
OR: 1-800-404-6044
FAX: (306) 287-3355

BY E-MAIL:
E-MAIL: info@schulte.ca

Testimonials

XH-1500 and FX-520 Rotary Cutters

After our company switched to Schulte, our revenue per cutter went up 33%. We were getting paid by the acre so we were always worried about production and cost per acre. We were having problems with competitive cutters. We tried the Schulte cutters and it didn’t take us long to figure out that it was the cutter we wanted. We didn’t realize how bad our previous cutters were until we put a Schulte on the ground. We think the Schulte cuts better period. It’s unbelievable the quality of cut that we can get at what we would call a high rate of mowing speed. We get paid by the acre so productivity is a big deal for us, ground speed is a big deal for us.

Roman Albert Owner of Lot Maintenance of Oklahoma Inc., Tulsa OK

View All

Safety is Always Front-of-Mind.


Copyright © 2017 Schulte Industries Ltd. All Right Reserved.

Webdesign & Development by 2 Web Design