Products → Snow Blowers & Blades → RDX-102 Snow Blower


RDX-102 Snow Blower

  • 102” wide cut and efficient twin stage design are ideally suited to 85-140 HP tractors.
  • The RDX-102 rotating drum allows snow to be ejected out left or right side or center chute.
  • In heavy wet snow, blowing capacity of the RDX-102 is greatly increased as the snow can be discharged directly off the fan paddles versus all the way up through the center chute.
  • Highly efficient 30” - four paddle fan with an open center and cupped blades.
  • A heavily reinforced auger feeds snow to the fan and ensures that chunks of ice and hard packed snow are broken up before being discharged.
  • A replaceable cutting blade and replaceable adjustable skid shoes are standard.
  • A heavy duty gearbox with 1 5/8” splined shafts provides positive power delivery to the fan.
  • UHMW bearing and bronze bushings in the rollers allow for reduced freeze-up on chute.
  • Shear bolt protection for the fan and cross auger.
  • Enclosed chain case protects the drive chain from debris.
  • Cutting Width

    102” (2.6 m)

  • Tractor Horsepower

    85-140 HP (63 - 104 kW)

  • Cutting Height

    37" (939 mm)

  • Overall Height

    100" (2.54 mm)

  • Auger Diameter

    23” (584 mm)

  • Fan Diameter

    30” (762 mm)

  • Fan Type

    4 paddle

  • Fan Shaft Diameter

    1 5/8" (41 mm)

  • Auger Drive Chain

    #80

  • Weight

    2050 lbs. (930 kg)

  • Hitch Size

    Cat II, Cat II quick hitch

  • PTO Speed

    540 RPM

  • Capacity - dry snow / wet snow

    426 tons/hr / 1343 tons/hr

SDX 102 and RDX 102 Snow Blower


HOME

Quality - Service - Value - Trust
 

About Us
Schulte Industries' origins started on April 17th, 1912, when Caspar Schulte acquired the (smithy) blacksmith business in Englefeld, Saskatchewan. Caspar's oldest son John Schulte joined the business with his father in 1932, and like his father, was kept busy keeping customers happy. In 1938 John Schulte took over the blacksmith business on his own.

Read More

 

 

California Supply Chains Act

Contact Info

BY PHONE:
PHONE: (306) 287-3715
OR: 1-800-404-6044
FAX: (306) 287-3355

BY E-MAIL:
E-MAIL: info@schulte.ca

Testimonials

Kelly Hall C & H Mowing

XH-1500 Rotary Cutters

“We’ve found a mower that will stand the test of time, without a doubt the best mower we’ve ever had. We’ve been in business since 1983, we bought four Schulte mowers in ‘94 and a couple more in ‘97 and before we knew it they were all green, we didn’t have any more red ones or yellow ones. The biggest thing we’ve found with Schulte over the competition we used prior to ‘94 is we didn’t have to get the service truck out to the mow route every day when they’d be down for an hour or two once a week on average, if not more. When you’re out on the highway getting paid by the job not the hour, you’re not making money when they’re sitting still. The series three has been almost bullet proof, that’s on highway mowing you know, running 100 pound semi recaps and drive line knuckles through them. I’ve hit three bowling balls in my career, we test them out. I like to give credit where credit is due, you guys have a good product.”

Kelly Hall C & H Mowing, Hebron, IN

View All

Safety is Always Front-of-Mind.


Copyright © 2018 Schulte Industries Ltd. All Right Reserved.

Webdesign & Development by 2 Web Design