Products → Snow Removal → SDX-117 Snow Blower


SDX-117 Snow Blower

  • Schulte’s SDX-117 incorporates a 38” Five paddle open center cupped style fan which improves performance and is larger than most competitive designs on the market.
  • On the SDX-117, a 1000 RPM gear driven drive system is standard.
  • A size 8 Bondioli power shaft is included with shear pin protection to power the blower.
  • A Bondioli Italian made 1 piece gearbox drives this unit.
  • A heavily reinforced 23” bottom auger with formed struts ensures that hard chunks of snow and ice are fed into the fan with ease.
  • A 300 degree rotating chute includes a UHMW bearing area to reduce chute freeze up.
  • The new double deflector design reduces blowback when the chute deflector is placed in the down position.
  • Optional gauge wheels with tapered roller bearings available for highway or pavement use.
  • An optional 2” x 6” cylinder for chute deflection is available.
  • Cutting Width

    117” (2.97m)

  • Tractor Horsepower

    140 - 220 HP (104 - 164 kW)

  • Cutting Height

    45 1/2” (1.15m)

  • Overall Height

    100” (2.54m) (With HD Chute)

  • Auger Diameter - Bottom

    23” (58.4cm)

  • Auger Diameter - Top

    14” (35.5cm)

  • Fan Diameter

    38” (96.5cm)

  • Fan Type

    5 paddle

  • Fan Shaft Diameter

    2” (5.1cm)

  • Auger Drive Chain

    #80

  • Weight

    2750lbs (1247kg)

  • Adjust. Double Linked Chute Deflector

    Standard

  • Hydraulic Chute Rotation Mechanism

    Standard

  • Replaceable Blade

    Standard

  • Adjustable Replaceable Skid Shoes

    Standard

  • Hitch Size

    Cat II & Cat III 3pt and quick hitch

  • PTO Speed

    1000 RPM

  • Capacity - Dry Snow / Wet Snow

    762tons/hr / 2394tons/hr

*On hydrostatically driven tractors, less HP is required than the 140-220HP recommended for conventional tractors.

SDX/RDX 117 Snow Blower


HOME

Quality - Service - Value - Trust
 

About Us
Schulte Industries' origins started on April 17th, 1912, when Caspar Schulte acquired the (smithy) blacksmith business in Englefeld, Saskatchewan. Caspar's oldest son John Schulte joined the business with his father in 1932, and like his father, was kept busy keeping customers happy. In 1938 John Schulte took over the blacksmith business on his own.

Read More

 

 

California Supply Chains Act

Contact Info

BY PHONE:
PHONE: (306) 287-3715
OR: 1-800-404-6044
FAX: (306) 287-3355

BY E-MAIL:
E-MAIL: info@schulte.ca

Testimonials

XH-1500 and FX-520 Rotary Cutters

After our company switched to Schulte, our revenue per cutter went up 33%. We were getting paid by the acre so we were always worried about production and cost per acre. We were having problems with competitive cutters. We tried the Schulte cutters and it didn’t take us long to figure out that it was the cutter we wanted. We didn’t realize how bad our previous cutters were until we put a Schulte on the ground. We think the Schulte cuts better period. It’s unbelievable the quality of cut that we can get at what we would call a high rate of mowing speed. We get paid by the acre so productivity is a big deal for us, ground speed is a big deal for us.

Roman Albert Owner of Lot Maintenance of Oklahoma Inc., Tulsa OK

View All

Safety is Always Front-of-Mind.


Copyright © 2017 Schulte Industries Ltd. All Right Reserved.

Webdesign & Development by 2 Web Design