Products → SoilStar Tillage → DHX-360 Disc Harrow


DHX-360 Disc Harrow

  • The DHX’s two rows of 18” eight wave coulters on 7.2” spacing followed by five bars of 5/8” x 26” heavy harrow tines allows it to efficiently chop straw, mix residue with the ground all while spreading and levelling.

  • The coulters are mounted to a four-bolt service free hub and a specially designed flat bar shank. The four-bolt hub includes an Over Cap, a Grasswrap Guard, a V-Seal and a Triple Lip Seal protecting back to back Ball Bearings that will provide years of trouble-free use. The hub is completely rebuild-able to help reduce service costs and down time. The flat bar shank has been designed out of ½” x 4” 6150 spring steel for long life excellent ground following.

  • The harrow tine coils are designed to get larger towards the outside of the tine to reduce stress during field operation. All harrows are controlled hydraulically for on the go adjustment. The down pressure on the harrow section can be easily adjusted with two large tension springs.

  • There is a single point depth control for the discs mounted at the rear of the machine. Simply move the adjustment along the slide to set your disc depth.

  • The main frame of the DHX is made from 12” x 12” 3/8” thick tubing making the machine robust and providing the necessary weight to make the disks extremely effective. The wing frames have been designed to carry almost an additional 3,000 lbs of water which adds an extra 30 lbs force to each disk for increased penetration if needed.

  • The wing knuckle is made from 2” plate and uses 2.5” diameter Nitrided pins and MLG fiber bushings making it service free.

  • No more Cables! The DHX incorporates a hydraulic lock for the wing tension links. Cables stretch and can catch on things and inadvertently open the lock during operation. The new hydraulic actuated lock eliminates all those issues and incorporates a lock pin to ensure inadvertent actuation of the cylinder during field operation.

  • The DHX units always have positive hitch weight in the transport position unlike many of the traditional harrows in the marketplace. This is achieved through over centering the frame when lifting the machine into transport position. This over centering also widens the clearances between the center section and wing for ground following in the transport position.

  • Steerable wing wheels allow the unit to easily go in or out of transport mode. The tires are 500/45 22.5 radials.

  • Working Width

    36 ft

  • Transport Width

    15.25 ft

  • Transport Height

    14.5 ft

  • Transport Length

    33.5 ft

  • Weight

    25,000 lbs

  • # of Disc/Harrow Sections

    3

  • Width of Sections

    12 ft

  • Rows of Discs

    2

  • Size of Discs

    18”

  • Type of Disc

    Straight, 8 wave

  • Width of Disc

    2.25”

  • Disc Spacing

    7.2”

  • Disc Shank

    1/2” x 4”

  • Disc Hub

    4 bolt, sealed

  • Disc Angle

  • Harrow Layout

    5 bar

  • Harrow Tyne

    5/8” x 26” with tip

  • Harrow Angle Adj.

    35 - 90 degrees

  • Tires

    500/45R22.5 Radials

  • Hubs

    8 bolt - 10,000lb

  • Main Boom Tubing

    12” x 12” x 3/8”

  • Number of Hyd. Outlets

    4

  • Safety Lighting, SMV

    Standard

  • Horsepower Required

    7-9 Hp per foot width

HOME

Quality - Service - Value - Trust
 

About Us
Schulte Industries' origins started on April 17th, 1912, when Caspar Schulte acquired the (smithy) blacksmith business in Englefeld, Saskatchewan. Caspar's oldest son John Schulte joined the business with his father in 1932, and like his father, was kept busy keeping customers happy. In 1938 John Schulte took over the blacksmith business on his own.

Schulte Industries manufactures Rock Pickers, Snow Blowers, Tillage Equipment and Rotary Cutters

Read More

 

 

California Supply Chains Act

Contact Info

BY PHONE:
PHONE: (306) 287-3715
OR: 1-800-404-6044
FAX: (306) 287-3355

BY E-MAIL:
E-MAIL: info@schulte.ca

Testimonials

5026 Rotary Cutter

"I'm a rancher with a lot of mowing to do. When its time to mow, I need to go. Maintenance and downtime was something we always had with batwing rotary cutters. We purchased a Schulte 5026 26 ft. batwing mower 2 years ago. This cutter has been over a lot of acres and our down time and maintenance has only included 2 flat tires and greasing. We like Schulte mowers and have recently purchased a XH1500 Series 3 15 ft. cutter. We highly recommend Schulte mowers. They are just plain dependable." 

Bill Inhofe Rancher, Muskogee, OK USA

View All

Safety is Always Front-of-Mind.


Copyright © 2020 Schulte Industries Ltd. All Right Reserved.

Webdesign & Development by 2 Web Design