-
New heavy duty 11L x 15, 12 ply tires with a load capacity
of 4000 lbs.
- Cut directly in-line with the tractor or at any offset distance
up to 122” (10.16ft)
- Large 2-1/2” castor pivot shaft
- 6000 lb capacity 6 bolt hubs
- Spring steel tension bushings and induction hardened pins
at major pivot points
- Minimum of 3 hydraulic circuits required to operate the
FLEX ARM with a 15’ or 10’ mower
- If independent wing lift is required on 15’ mower
then 4 hydraulic circuits or optional _selector
valve kit is required
- Heavy duty 3-1/2 X 36 welded hydraulic cylinder
- Weight of the FLX-1510 is 2557 lbs
- Safety lighting kit
- Bolt-in replaceable axles
- Esily detached from the rotary cutter by disconnecting the
hitch and the stabilizer strut
- Continuous power rating of 200HP at 1000 RPM
- Accommodates 540 or 1000 RPM power delivery from the tractor
- Optional 6 port selector valve kit for independent wing
action or limited tractor hyd. outlets
- Transport widths:
Arm & rotary cutter. 70” to the
left of the tractor and 52” to the right for a total
of 121” Arm alone. 70” to the left of the tractor
and 47” to the right for a total of 117” Arm & rotary cutter with stop block installed
on the transport lock bar. 55” to the left
of the tractor and 66” to the right. In this configuration
the arm is 19” off center. The stop block can be installed
when working on narrow roads to improve clearance for oncoming
traffic.
