14 Feb 2018

SoilPro VTX-300 VTX-420

Ground Breaking Technology

In today’s complicated and ever changing world of agriculture there are many types of tillage on one farm much less all over the world. Types of tillage will differ from spring preparation work to fall field work, from a dry year to a wet year, and from vertical tillage to conservation tillage to primary tillage or residue management. All these types of tillage require different machines, until now.

Introducing the new Schulte VTX-300 and VTX-420 SOILPRO, an all-in-one tillage machine for your farm.

The SOILPRO can do it all, from a light to an extreme tillage pass with aggressive concave discs; to a vertical tillage pass or seedbed preparation with straight discs, and everything in between. This is all accomplished with the ability to adjust the disc angle on the go from 0° to 22° degrees, along with the weight of 1,150 lbs/ft to deal with any type of crop residue or ground condition.

The SOILPRO’s disc unit is the heart of the machine. It has an adjustable disc angle from 0° to 22°. The disc angle is adjusted hydraulically on the go from the tractor cab. This adjustable disc angle allows for aggressive primary tillage with concave discs all the way to true vertical tillage with straight discs. It can operate in the heaviest and toughest residue conditions or it can do a light seedbed preparation pass.

The SOILPRO is the ideal machine for both vertical tillage and residue management. To accomplish this, 24” low concavity wavy discs are used for more aggressive tillage. The 22” straight 13 wave discs are used for vertical tillage. To accomplish ideal field finish both above and below the soil surface, the disc spacing is adjusted when working in vertical tillage or residue management mode. Adjustment is made simple by sliding the rear disc gang between stops.



Rob Muench

Marketing Coordinator


Quality - Service - Value - Trust

About Us
Schulte Industries' origins started on April 17th, 1912, when Caspar Schulte acquired the (smithy) blacksmith business in Englefeld, Saskatchewan. Caspar's oldest son John Schulte joined the business with his father in 1932, and like his father, was kept busy keeping customers happy. In 1938 John Schulte took over the blacksmith business on his own.

Read More



California Supply Chains Act

Contact Info

PHONE: (306) 287-3715
OR: 1-800-404-6044
FAX: (306) 287-3355



5026 Rotary Cutter

"We are a 5000 acre Texas South Plain cotton farm. We purchased a Schulte 5026 rotary cutter 5 years ago. All of our cotton acres are shredded annually plus we mow a lot of CRP. Shredded or mowed material is evenly distributed. The machine has more than exceeded our expectations. Maintenance on our Schulte is minimal; a set of blades lasts well through a season. The Schulte 5026 is very operator friendly, which makes it easy for any of our operators to run the machine." 

Theadore Wells Cotton Farmer, Stanton, TX

View All

Safety is Always Front-of-Mind.

Copyright © 2017 Schulte Industries Ltd. All Right Reserved.

Webdesign & Development by 2 Web Design