Products Rotary Cutters Mowers XH-1500 INDUSTRIAL GRADE ROTARY CUTTER

XH-1500 INDUSTRIAL GRADE ROTARY CUTTER

xh-1500-industrial-grade-rotary-cutter_1xh-1500-industrial-grade-rotary-cutter_gallery_1xh-1500-industrial-grade-rotary-cutter_gallery_2xh-1500-industrial-grade-rotary-cutter_gallery_3xh-1500-industrial-grade-rotary-cutter_gallery_4xh-1500-industrial-grade-rotary-cutter_gallery_5xh-1500-industrial-grade-rotary-cutter_gallery_6xh-1500-industrial-grade-rotary-cutter_gallery_7xh-1500-industrial-grade-rotary-cutter_gallery_8xh-1500-industrial-grade-rotary-cutter_gallery_9
xh-1500-industrial-grade-rotary-cutter_1xh-1500-industrial-grade-rotary-cutter_gallery_1xh-1500-industrial-grade-rotary-cutter_gallery_2xh-1500-industrial-grade-rotary-cutter_gallery_3xh-1500-industrial-grade-rotary-cutter_gallery_4xh-1500-industrial-grade-rotary-cutter_gallery_5xh-1500-industrial-grade-rotary-cutter_gallery_6xh-1500-industrial-grade-rotary-cutter_gallery_7xh-1500-industrial-grade-rotary-cutter_gallery_8xh-1500-industrial-grade-rotary-cutter_gallery_9
  • Extra heavy duty 15 foot, rotary cutter, high horsepower Bondioli gearboxes with new oil level sight glass and 1-3/4″ input shafts and 3” (75mm) output shaft
  • New extra heavy duty Bondioli G8 drive lines
  •  New high-torque wing clutches ensure better performance in rough cutting
  • Fitted with replaceable spring steel bushings at all major pivot locations to increase the ease of maintenance and life of the rotary cutter.  New locations include the pivot points on the hitch, tension links, centre suspension, wing suspension and all wheel standards. 
  • Single domed, sweep clean deck design eliminates excess weight over competitive double-deck designs, eliminates build up of debris and prevents rusting on top side of deck
  • Tandem walking axles result in smooth operation over rough surfaces
  • A deep cutting chamber coupled with high blade tip speeds result in a superior cut & unsurpassed material flow
  • 24″ severe duty tires, transport height is increased to 17.5″ along with improved performance in wet conditions
  • Lower pressure 8″ stroke hydraulic phasing cylinders for a level lift
  • Low maintenance CV Tractor Shaft or 540rpm Equal Angle Hitch available
  • Serviceable, bolt on hitch swivel
  • Centre suspension reduces stress on tractor drawbar
  • 3/8” thick formed deck protection rings prevent blade to deck contact
  • Double safety chains with individually replaceable links are standard equipment
Cutting widthXH1500 -XH1000 180" (4.57m)......................126" (3.20m)
Overall width190" (4.83m)......................139" (3.53m)
Overall length192" (4.88m)......................192" (4.88m)
Transport widthmin 88" (2.24m)..................88" (2.24m)
Transport height88" (2.24m)........................88" (2.24m)
Deck thickness7GA (3/16") (4.6mm)...........7GA (3/16") (4.6mm)
Weight, approx.5800 lbs (2636kg)...............5200 lbs (2364kg)
Hitch weight, approx.1900 lbs (864kg).................1700 lbs (773kg)
Minimum tractor HP65 HP (52kW).....................50 HP (45kW)
Recommended tractor HP85 HP (67kW).....................75 HP (60kW)
Cutting height1.5 to 17.5" (38 to 456mm)
Ground clearance17.5" (444mm) (with 24” tire)
Cutting capacity4" material (102mm)
Blade overlap6.5" (165mm)
Divider gearbox rating260 HP (194kW)
Centre/wing gearbox rating225 HP (168kw)*
Blade tip speed540 rpm
Centre850 rpm, 15,743 ft/min (4884m/min)
Wing1002 rpm, 16,022 ft/min (4798m/min)
Wing working range25 degrees down to 90 degrees up
Drive Size Center and WingsCategory 6

* Based on intermittent use.