FM-115
- The FM-115 is a perfect match for Schulte model SDX or RDX snow blowers and without the drivetrain for the SV-10, SV-12 and SV-14 Folding V Plows.
- No matter how much snow you need to move you will appreciate the FM-115. The Front Mount Frames give you the ability to mount your 3pt snow blower or SV Plow on the front of your tractor instead of on the tractor’s rear 3pt hitch.
- The FM-350 and FM-115 offer you better visibility and ergonomics when coupled with a Schulte Snow Blower. Blowing snow while driving forward, is more efficient than blowing snow in reverse.
- The FM-115 allow you an increased selection of travel speeds, as your tractor has many more forward gears then reverse gears. This increased gearing selection will result in better snow blowing performance and less wear and tear on the tractor clutch, and your neck.
- NOTE: This frame is not compatible with mounting on tractors equipped with Super-Steer
| Tractor horsepower, minimum | 55 HP (41 kw) for SDX-840, 85 HP (63kw) for SDX-102, RDX-102 |
| Tractor horsepower, maximum | 115 HP (86 kw) |
| Tractor Hydraulic Requirement | 3 remote circuits with a minimum total hydraulic output of 10 GPM at 1200 PSI. |
| Tractor PTO | 540 RPM |
| Lift capacity | 5000 lbs (2268 kg) |
| Adjustability | Fits tractors between 111.5” (2.8m) & 164.5” (4.2m) from front mount plate to drawbar pin |
| Nominal ground clearance | 10”(25 cm) depending on tractor installation 3”(7.6 cm) higher without drive train depending on tractor installation |
| Nominal lift range | 18” (45.7cm) |
| Weight | 1400 lbs (636kg) |