Products Rotary Cutters Mowers FX-1800 ROTARY CUTTER

FX-1800 ROTARY CUTTER

fx-1800-rotary-cutter_1
fx-1800-rotary-cutter_1
  • A single domed 7 ga continuously welded deck makes this rotary cutter extremely easy to clean,prevents water pooling and rusting and helps shed debris.
  • 6.5 ” blade overlap and high blade tip speeds.
  • A four gearbox drive line with independent slip clutches. The FX-1800 utilizes heavy-duty and extremely reliable Bondioli gearboxes. The splitter has 1 3/4 ” 20 spline input and output shafts and is rated at 260 HP (194kw). The centre and wing boxes have 1 3/4 ” 20 spine input shafts, 2 3/8 ” down shafts and are rated at 225 HP (168kw)*.
  • An 80 degree CV shaft allows for smooth power transmission during tight turns.The CV for 540 rpm is a Category 6 and for 1000 rpm is a category 5 The driveline on the cutter itself employs self adjusting friction clutches to protect your investment and always operate at peak performance. All clutches are located under the main shield for ease of service.
  • Spun formed 7gauge stump jumpers (round skid pans) ensure durability and balance.
  • Available in 540 or 1000rpm drive.

* Based on intermittent use.

Cutting Width180 ” (4.57m)
Overall Width190 ” (4.83m)
Overall Length202 ” (5.13m)
Transport Width93” (2.36m) (Singles on wings) 102" (2.59m) (Duals on wings)
Transport Height84"(2.13m)
Deck Thickness7GA (3/16",4.6mm)
Weight5,600 lbs (2540kg) (Depends on configuration)
Hitch Weight1680 lbs (762kg) (Depends on configuration)
Minimum Tractor Hp50 HP (37kW)
Recommended Tractor HP85 HP (63kW)
Tractor PTO Speed540 or 1000rpm
Cutting Height1.75"to 16.75" (44.5mm to 425mm)
Ground Clearance14.75"(42.5mm)
Cutting Capacity4"(101.6mm)
Blade Overlap6.5"(165.1mm)
Divider Gearbox Rating260 HP (194kw)
Center & Wing Gearbox Rating225 HP (168kw)*
Output Shaft2.38"(60.3mm)
Blade Tip Speed540 rpm
Center15980 ft/min (4871m/min)
Wing15459 ft/min (4711m/min)
Blade Tip Speed1000 rpm
Center15974 ft/min (4869m/min)
Wing15708 ft/min (4788m/min)
Wing Working Range25 o down to 87 o up
Wing Floating Range25 o down to 30 o up
Drive Size, MainCat.5CV (1000rpm),Cat.6 CV (540 rpm)
Drive Size, Centre and WingsCategory 6
Side Skirt Depth & Thickness13.63" (346mm) & 1/4” (6.35mm)
SuspensionRubber gromett 3 puck system
TiresLaminate, Aircraft (5 bolt) 22” size

* Based on intermittent use.

FX-1800 Cutting Slough Grass