Virtual Trade ShowXH-1000 SERIES 4 INDUSTRIAL GRADE CUTTER
- Schulte’s heavy duty 10 foot flex wing, rotary mower
- New, extra heavy duty, high horsepower Bondioli gearboxes with new oil level sight glass and 1-3/4″ input shafts and 3” (75mm) output shaft
- New extra heavy duty Bondioli G8 drive lines
- New high-torque wing clutches with high slip release settings ensure better performance in rough cutting
- Single domed, sweep clean deck design eliminates excess weight over competitive double deck designs, eliminates build up of debris and prevents rusting on top side of deck
- Tandem walking axles result in smooth operation over rough surfaces
- Increased frame depth & blade tip speed results in a superior flow of material
- With larger 24″ aircraft tires, transport height is increased to 17.5″ along with improved performance in wet conditions
- Lower pressure 8″ stroke hydraulic phasing cylinders for a level lift
- Low maintenance Constant Velocity Tractor Shaft or Patent Pending 540rpm Equal Angle Hitch available
- Centre suspension reduces stress on tractor drawbar
- 3/8” thick formed deck protection rings prevent blade to deck contact
- Double safety chains with individually replaceable links are standard equipment
- Large high horsepower gearboxes with 1-3/4″ input shafts and 2-3/8″ output shafts, 260hp divider, 210hp centre & wings
- Higher slip clutch release settings than previous design ensures better performance in rough cutting
- 1/4” thick stump jumpers with patent pending Pentagon Blade Bolt design allows cutter sections to ride over obstructions
| Cutting width | 126" (3.20 m) |
| Overall width | 139" (3.53 m) |
| Overall length | 192" (4.88 m) |
| Transport width, min | 88" (2.24 m) |
| Transport Height | 88" (2.24 m) |
| Deck Thickness | 7GA (3/16") (4.6 mm) |
| Weight, approx. | 5200 lbs (2364 kg) |
| Hitch weight, approx. | 1700 lbs (773 kg) |
| Minimum tractor HP | 50 HP (45 kW) |
| Recommended tractor HP | 75 HP (60 kW) |
| Cutting height | 1.5 to 17.5" (38 to 144 mm) |
| Ground Clearance | 17.5" (444mm)(with 24” tire) |
| Cutting capacity | 4" material (102 mm) |
| Blade overlap | 6.5" (165mm) |
| Divider gearbox rating | 260 HP (194kW) |
| Centre/wing gearbox rating | 210 HP (157 kW) |
| Blade tip speed | 540 rpm |
| Centre | 848 rpm, 15,493 ft/min (4874m/min) |
| Wing | 986 rpm, 15,991 ft/min (4722m/min) |
| Blade tip speed | 1000 rpm |
| Centre | 850 rpm, 15,743 ft/min (4884m/min) |
| Wing | 1002 rpm, 16,022 ft/min (4798m/min) |
| Wing working range | 25 degree down to 90 degree up |